Where to find Ignition switch replacement in College Station
If you are checking for different professionals offering services of Ignition switch replacement College Station , then first we need to take a look at the necessary steps.
Step 1:
Sitting in your car with the doors closed, place the transponder key in the
ignition of your car and turn it into the ON position. Do not turn the engine
on. You will want to keep this on for a precise 10 minutes and 25 seconds – so
use the timer on your phone to ensure you get the timing right. At this time,
the security light on your dashboard will light up. If it doesn’t, you may need
to check your battery.
Step 2:
Once the security light illuminates, set the timer again – this time for 15
minutes. Remember, you must be meticulous with the time. After it elapses, the
security light on your dashboard should go off.
Step 3:
Three minutes after the security light turns off, turn your ignition OFF – and
then turn it right back ON again. When you do, the security light should
reappear and stay on for another 15 minutes before it shuts off again.
Step 4:
As the security light on the dashboard disappears, wait 3 minutes and then turn
the ignition OFF – and then turn it right back ON again. And, as predicted the
security light will illuminate on the dashboard for another 15 minutes before
the light turns off.
The
transponder key should now be programmed to your automobile. Try turning on
your engine with the key as it should start now – and allow you to drive
without any issues.

Comments
Post a Comment